AlGaAs/GaAs Heterojunction Bipolar Transistors with 4W/mm Power Density at X-Band
- 1 January 1987
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2, 969-972
- https://doi.org/10.1109/mwsym.1987.1132583
Abstract
Fabrication and microwave characterization of X-band AIGaAs/GaAs heterojunction bipolar transistors are described. MBE was used to prepare the device structure with heavily doped (1x10/sup 19/cm/sup -3/) 1000A thick base layers. Two 2 µm x 10 µm emitter fingers separated by 2 µm (total emitter periphery of 40 µm) were used in a self-aligned emitter-base configuration. From the S-parameter measurements f/sub t/ and f/sub max/ values of 25 and 20 GHz respectively were determined. Devices operating under CW conditions produced 80 mW CW output power (2W/mm of emitter periphery) with 4 dB gain and 23% power added efficiency at 10 GHz. Under 0.25 µs pulses, 160 mW output power (4 W/mm) was obtained with 4 dB gain and 35% power added efficiency.Keywords
This publication has 6 references indexed in Scilit:
- Emitter—Base—Collector self-aligned heterojunction bipolar transistors using wet etching processIEEE Electron Device Letters, 1986
- AlGaAs/GaAs heterojunction bipolar transistor circuits with improved high-speed performanceElectronics Letters, 1986
- Surface Damage of Reactive Ion Beam Etched GaAsJapanese Journal of Applied Physics, 1986
- Reduction of extrinsic base resistance in GaAs/AlGaAs heterojunction bipolar transistors and correlation with high-frequency performanceIEEE Electron Device Letters, 1986
- Design and fabrication of a GaAs vertical MESFETIEEE Transactions on Electron Devices, 1985
- AlGaAs/GaAs Heterojunction bipolar power transistorsElectronics Letters, 1985