Reliability assessment of flip-chip assemblies with lead-free solder joints
- 1 January 2002
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 05695503,p. 1246-1255
- https://doi.org/10.1109/ectc.2002.1008266
Abstract
Due to environmental awareness, and the health hazards involved in using lead in solders, large efforts to develop lead-free soldering have been made in recent years. Sn-Ag alloys are expected to be one of the best candidate lead-free solders. Furthermore, from a reliability viewpoint, there has been interest in improved thermal fatigue resistance of solder interconnects. In this study, two lead-free solder alloys (Sn96.5Ag3.5, Sn95.5Ag3.8Cu0.7) were investigated in comparison to lead-containing solder alloys (Sn63Pb37, Sn59Pb40Ag1). These investigations were focused on mechanical and physical properties (coefficient of thermal expansion, stress-strain curves at different strain-rates) as well as on the microstructural appearance of the solders. The mechanical and thermomechanical behavior of the solders were examined by TMA, DTMA, tensile tests, and creep tests. Constant-load creep tests were performed on the specimens at temperatures from 20/spl deg/C to 150/spl deg/C. Steady-state strain rates spanned seven orders of magnitude ranging from 10/sup -11/ s/sup -1/ to 10/sup -4/ s/sup -1/. The second step is a reliability study of flip-chip assemblies on FR-4 (high T/sub g/ material) with three different underfill materials and with Sn63Pb37, Sn96.5Ag3.5, and Sn95.5Ag4.0Cu0.5 bumps, undergoing thermal cycles from -55/spl deg/C to 125/spl deg/C and -55/spl deg/C to 150/spl deg/C. The deterioration (characterized by electrical resistance and SEM) are described. Furthermore, it is shown that the material parameters obtained from the tests will increase the precision of finite-element analysis for reliability studies of microelectronic packages with lead-free solder interconnects.Keywords
This publication has 12 references indexed in Scilit:
- TMA, DMA, DSC, and TGA of lead free soldersPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2002
- The kinetics of formation of ternary intermetallic alloys in Pb-Sn and Cu-Ag-Sn Pb-free electronic jointsPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2002
- Constitutive behaviour of lead-free solders vs. lead-containing solders-experiments on bulk specimens and flip-chip jointsPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2001
- Thermo-mechanical properties and creep deformation of lead-containing and lead-free soldersPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2001
- Numerical and experimental investigations of large IC flip chip attachPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2000
- Experimental and numerical reliability investigations of FCOB assemblies with process-induced defectsPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2000
- Creep, stress relaxation, and plastic deformation in Sn-Ag and Sn-Zn eutectic soldersJournal of Electronic Materials, 1997
- An efficient approach to predict solder fatigue life and its application to SM- and area array componentsPublished by Institute of Electrical and Electronics Engineers (IEEE) ,1997
- Modeling of the Thermomechanical Fatigue of 63Sn-37Pb AlloyPublished by ASTM International ,1993
- Deformation of PbSn eutectic alloys at relatively high strain ratesActa Metallurgica, 1979