High-power operation of aluminum-free ( kappa =0.98 mu m) pump laser for erbium-doped fiber amplifier
- 1 June 1993
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 5 (6) , 589-591
- https://doi.org/10.1109/68.219677
Abstract
The authors discuss the fabrication and characteristics of high-power (P/sub CW/=430 mW) InGaAs/InGaAsP/InGaP ridge waveguide lasers emitting at lambda =0.98 mu m, which is the optimum wavelength for pumping erbium-doped fiber amplifiers. In the past, high-power operation of Al-free pump lasers has been limited to 150 mW because of catastrophic optical damage of the mirror facet. This problem has been largely removed by increasing the spot size of the laser with the aid of an improved waveguide design. As a result, Al-free lasers can now achieve a maximum power comparable to the conventional GaAlAs-based pump lasers for lambda =0.98 mu m.Keywords
This publication has 7 references indexed in Scilit:
- Low threshold 0.98 μm aluminium-free strained-quantum-well InGaAs/InGaAsP/InGaP lasersElectronics Letters, 1993
- Chemical beam epitaxy of GaInP on GaAs(100) substrates and its application to 0.98 μm lasersJournal of Crystal Growth, 1992
- High-power InGaAs-GaAs strained quantum well lasers with InGaP cladding layers on p-type GaAs substratesJournal of Applied Physics, 1992
- Low threshold current InGaAs/GaAs/GaInP lasers grown by gas-source molecular beam epitaxyApplied Physics Letters, 1992
- Self-aligned InGaAs/GaAs/InGaP quantum well lasers prepared by gas-source molecular beam epitaxy with two growth stepsApplied Physics Letters, 1991
- High-power 980-nm AlGaAs/InGaAs strained quantum-well laser grown by OMVPEIEEE Photonics Technology Letters, 1991
- High power CW operation of aluminium-free InGaAs/GaAs/InGaP strained layer single quantum well ridge waveguide lasersPublished by Institute of Electrical and Electronics Engineers (IEEE) ,1990