Threshold adjustments for complementary metal-oxide-semiconductor optimization using B and As focused ion beams
- 10 March 1986
- journal article
- Published by AIP Publishing in Applied Physics Letters
- Vol. 48 (10) , 668-669
- https://doi.org/10.1063/1.96738
Abstract
Threshold adjustments have been performed on n- and p-channel metal-oxide-semiconductor (mos) field-effect transistors for complementary metal-oxide-semiconductor circuits using B and As focused ion beams (FIB’s). After conventional flood ion implantation for the wells and channels, additional selective threshold adjustment implants were made by FIB’s in 1×1012/cm2 increments. The threshold voltage shifts were 65 and 100 mV per each 1×1012/cm2 of FIB dose for PMOS and NMOS devices, respectively. Based on these results, precise tailoring of threshold values for optimal circuit performance appears practical.Keywords
This publication has 7 references indexed in Scilit:
- Characteristics of submicron patterns fabricated by gallium focused-ion-beam sputteringJournal of Applied Physics, 1985
- Si MOSFET fabrication using focused ion beamsIEEE Transactions on Electron Devices, 1984
- Maskless etching of a nanometer structure by focused ion beamsJournal of Vacuum Science & Technology B, 1983
- Selective Si and Be implantation in GaAs using a 100 kV mass-separating focused ion beam system with an Au–Si–Be liquid metal ion sourceJournal of Vacuum Science & Technology B, 1983
- Liquid metal alloy ion sources for B, Sb, and SiJournal of Vacuum Science and Technology, 1981
- A mass-separating focused-ion-beam system for maskless ion implantationJournal of Vacuum Science and Technology, 1981
- GaAs MESFET fabrication using maskless ion implantationIEEE Electron Device Letters, 1981