Mechanical Properties for 95.5Sn–3.8Ag–0.7Cu Lead-Free Solder Alloy
- 5 December 2005
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components and Packaging Technologies
- Vol. 28 (4) , 830-840
- https://doi.org/10.1109/tcapt.2005.848587
Abstract
Mechanical properties for 95.5Sn–3.8Ag–0.7Cu solder alloy were derived from bulk specimen tensile test and lap shear solder joint tests specimen. The tensile tests were carried out at three temperatures (25$^circhbox C$, 75$^circhbox C$, and 125$ ^circhbox C$) and at three different strain rates ($5.6times 10^-4 hbox s^-1$,$5.6times 10^-3$and$5.6times 10^-2 hbox s^-1$). Shear tests were carried out at three temperatures (25$ ^circhbox C$, 75$ ^circhbox C$, and 125$ ^circhbox C$) and at three different displacement rates (0.5, 0.05, and 0.005 mm/min). The specimen gave the highest strength at the fastest displacement rate and at room temperature of 25$ ^circhbox C$(0.61 Tm). The lowest strength occurs when the specimen is subjected to the slowest displacement rate at elevated temperature of 125$ ^circhbox C$(0.81 Tm). Constant-load creep tests for bulk specimen were also conducted at three different temperatures (25$ ^circhbox C$, 75$ ^circhbox C$, and 125$ ^circhbox C$), test results were compared with other reported data.Keywords
This publication has 11 references indexed in Scilit:
- Acceleration models, constitutive equations, and reliability of lead-free solders and jointsPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2004
- Creep properties of Sn-rich solder jointsPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2004
- Tensile properties of Sn–Ag based lead-free solders and strain rate sensitivityMaterials Science and Engineering: A, 2004
- Reactions between Sn–Ag–Cu lead‐free solders and the Au/Ni surface finish in advanced electronic packagesSoldering & Surface Mount Technology, 2002
- Effects of cooling speed on microstructure and tensile properties of Sn–Ag–Cu alloysPublished by Elsevier ,2002
- Mechanical characterization of Sn–Ag-based lead-free soldersMicroelectronics Reliability, 2002
- Low-cycle fatigue behavior of Sn-Ag, Sn-Ag-Cu, and Sn-Ag-Cu-Bi lead-free soldersJournal of Electronic Materials, 2002
- Lead‐free reflow soldering for electronics assemblySoldering & Surface Mount Technology, 2001
- Analysis of ring and plug shear strengths for comparison of lead-free soldersJournal of Electronic Materials, 2000
- Effect of Temperature and Strain Rate on Mechanical Properties of 63Sn/37Pb Solder AlloyJournal of Electronic Packaging, 1999