Residual Elements and Their Effect on Applications of Austenitic Stainless Steels in the Power Industry
- 1 January 1967
- book chapter
- Published by ASTM International
Abstract
No abstract availableKeywords
This publication has 15 references indexed in Scilit:
- Metallurgical Factors Influencing Hot Ductility of Austenitic Steel Piping at Weld Heat-Affected Zone TemperaturesJournal of Engineering for Power, 1963
- Metallurgical Principles Governing the Creep-Rupture Strength of Type 321 (“18-8 + Ti”) Austenitic Steel Superheating Tubing With Limited Extension to Type 304 (“18Cr-8Ni”) and Type 316 (“18Cr-8Ni + Mo”) Austenitic SteelsJournal of Engineering for Power, 1963
- Metallurgical Evaluation of Superheater Tube Alloys After 12 and 18 Months’ Exposure to Steam at 1200, 1350, and 1500 FJournal of Engineering for Power, 1962
- Metallurgical Considerations of Main Steam Piping for High-Temperature, High-Pressure ServiceTransactions of the American Society of Mechanical Engineers, 1957
- Eight Years of Experience With Austenitic Steel Piping Materials at Elevated Steam ConditionsTransactions of the American Society of Mechanical Engineers, 1957
- Austenitic Steels in High-Temperature Steam PipingTransactions of the American Society of Mechanical Engineers, 1957
- Experimental Superheater for Steam at 2000 Psi and 1250 F—Report After 14,281 Hours of OperationTransactions of the American Society of Mechanical Engineers, 1957
- First Commercial Supercritical-Pressure Steam Turbine—Built for the Philo PlantTransactions of the American Society of Mechanical Engineers, 1957
- First Commercial Supercritical-Pressure Steam-Electric Generating Unit for Philo PlantTransactions of the American Society of Mechanical Engineers, 1957
- First Commercial Supercritical-Pressure Steam Generator for Philo PlantTransactions of the American Society of Mechanical Engineers, 1957