High-power V-band pseudomorphic InGaAs HEMT
- 1 May 1991
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 12 (5) , 213-214
- https://doi.org/10.1109/55.79559
Abstract
The author's present the DC and RF power performance of planar-doped channel InGaAs high-electron-mobility transistors (HEMTs). The planar-doped channel (PDC) pseudomorphic GaAs HEMT with 400 mu m of gate width exhibited an output power of 184 mW, corresponding to 460 mW/mm, with 4.6-dB saturation gain and 25% power-added efficiency at 55 GHz. Although higher power density is possible, the authors have designed the device to operate at less than 500 mW/mm for thermal and reliability reasons. Devices with unit gate finger widths ranging from 30 to 50 mu m were fabricated and characterized, with no performance degradation observed from using the longer gate fingers.Keywords
This publication has 8 references indexed in Scilit:
- A 0.15 mu m gate-length pseudomorphic HEMTPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2003
- High-gain W band pseudomorphic InGaAs power HEMTsIEEE Electron Device Letters, 1991
- Ultralow-noise W-band pseudomorphic InGaAs HEMT'sIEEE Electron Device Letters, 1990
- Very high power-added efficiency and low-noise 0.15- mu m gate-length pseudomorphic HEMTsIEEE Electron Device Letters, 1989
- A 0.25- mu m gate-length pseudomorphic HFET with 32-mW output power at 94 GHzIEEE Electron Device Letters, 1989
- AlGaAs/InGaAs heterostructures with doped channels for discrete devices and monolithic amplifiersIEEE Transactions on Electron Devices, 1989
- Millimeter-wave power operation of an AlGaAs/InGaAs/GaAs quantum well MISFETIEEE Transactions on Electron Devices, 1989
- A double-heterojunction doped-channel pseudomorphic power HEMT with a power density of 0.85 W/mm at 55 GHzIEEE Electron Device Letters, 1988