Electrical characteristics of Be-implanted GaAs diodes annealed with an ultrahigh power argon arc lamp
- 1 October 1983
- journal article
- Published by AIP Publishing in Applied Physics Letters
- Vol. 43 (7) , 647-649
- https://doi.org/10.1063/1.94470
Abstract
The potential of arc lamp annealing techniques in GaAs device processing is demonstrated by the fabrication of Be-implanted mesa pin diodes. Implants were done at 50 and 120 keV with doses of 4.4×1014 and 5.1×1014 cm−2, respectively (total dose =9.5×1014 cm−2) into a 14-μm-thick undoped (ND−NA≊7.5×1014 cm−3) GaAs epitaxial layer grown by vapor phase epitaxy. Ten-second annealing cycles with peak temperatures of 950° and 1050 °C have been studied. The electrical characteristics of these diodes are superior to published furnace-annealed, Be-implanted GaAs diodes.Keywords
This publication has 12 references indexed in Scilit:
- Rapid thermal annealing of Be, Si, and Zn implanted GaAs using an ultrahigh power argon arc lampApplied Physics Letters, 1983
- Infrared rapid thermal annealing of Si-implanted GaAsApplied Physics Letters, 1982
- Transient annealing of selenium-implanted gallium arsenide using a graphite strip heaterApplied Physics Letters, 1982
- Incoherent annealing of implanted layers in GaAsIEEE Electron Device Letters, 1982
- Very low resistance ohmic contacts on p-type InP by direct platingApplied Physics Letters, 1982
- Annealing of implantation damage in integrated-circuit devices using an incoherent light sourceJournal of Vacuum Science and Technology, 1982
- Properties of Be-implanted planar GaAs p-n junctionsIEEE Journal of Solid-State Circuits, 1978
- Electrical profiling and optical activation studies of Be-implanted GaAsJournal of Applied Physics, 1977
- Uniform-carrier-concentration p-type layers in GaAs produced by beryllium ion implantationApplied Physics Letters, 1976
- The role of radiation damage on the current-voltage characteristics of p-n junctionsSolid-State Electronics, 1974