200 kV Mass-Separated Fine Focused Ion Beam Apparatus
- 1 July 1985
- journal article
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 24 (7A) , L566
- https://doi.org/10.1143/jjap.24.l566
Abstract
A 200 kV mass-separated focused ion beam apparatus using alloy liquid metal ion sources has been developed. Focusing characteristics have been estimated by scanning ion microscope images of the metal mesh and the sputter etching pattern fabricated by the focused ion beam. A beam diameter smaller than 80 nm was obtained for Ga+ with 100 pA at 200 kV.Keywords
This publication has 15 references indexed in Scilit:
- Maskless Submicrometer Pattern Formation of Cr Films by Focused Sb Ion ImplantationJapanese Journal of Applied Physics, 1984
- Reduced Damage Generation in GaAs Implanted with Focused Be IonsJapanese Journal of Applied Physics, 1984
- High Dose Rate Effect of Focused-Ion-Beam Boron Implantation into SiliconJapanese Journal of Applied Physics, 1984
- Ion Beam Assisted Deposition of Metal Organic Films Using Focused Ion BeamsJapanese Journal of Applied Physics, 1984
- 30 nm Line Fabrication on PMMA Resist by Fine Focused Be Ion BeamJapanese Journal of Applied Physics, 1984
- Bi-Level Structures for Focused Ion Beam Using Maskless Ion EtchingJapanese Journal of Applied Physics, 1984
- 100 keV focused ion beam system with a E×B mass filter for maskless ion implantationJournal of Vacuum Science & Technology B, 1983
- A 100 kV Maskless Ion-Implantation System with an Au–Si–Be Liquid Metal Ion Source for III-V Compound SemiconductorsJapanese Journal of Applied Physics, 1983
- High resolution sputtering using a focused ion beamThin Solid Films, 1982
- A 100-kV ion probe microfabrication system with a tetrode gunJournal of Vacuum Science and Technology, 1981